Телескопические раздвижные ворота

Physical Linkage Self-Correction Structure

Through the coordinated operation of bottom support rollers, traveling wheels, and anti-wind components, each gate section is mechanically interconnected to form a closed-loop correction system.

Dual-Side Dual-Wheel Drive Chassis

The left and right dual-wheel load-bearing design provides stronger support capacity and balanced power output.

Combined with built-in wind-resistant components, the chassis maintains close contact with the track system, effectively resisting strong wind impact and preventing gate shaking or displacement.

Flexible Safety Airbag Anti-Pinch Protection

A flexible safety airbag is installed at the front end of the gate sections. The highly sensitive sensor system immediately detects contact with pedestrians, vehicles, or obstacles, triggering automatic rebound and shutdown.

The soft cushioning protection effectively prevents hard collisions and impact injuries, providing a safer and more user-friendly protection experience.

Mechanical Anti-Pinch Safety Device

The gate is equipped with an additional anti-pinch safety protection system. Mechanical anti-pinch devices are installed on both sides of the gate body.

During opening or closing operation, if a person or object comes into contact with the anti-pinch bar, the gate will immediately stop running to prevent injury or damage.

Front & Rear Infrared Safety Detection Gantry System

Safety detection gantries are installed at both the front and rear ends of the gate. Each gantry is equipped with three pairs of infrared detection sensors.

The lower infrared sensors provide anti-collision monitoring, while the upper infrared sensors detect climbing or unauthorized intrusion attempts.

The full-area infrared monitoring system provides comprehensive safety coverage without blind spots, delivering a high-standard security protection solution.